SMARC DEV KIT

LVDS/MIPI-DSI connector, interface shared with 2x eDP connectors 
Backlight control + LCD selectable voltages dedicated connector
2x DP++ connector
HDMI connector (can be used in alternative to 1xDP++)
2x CSI Camera input interfaces

SATA M 7p connector with dedicated power connector,
interface shared with M.2 Socket 2 2230 / 2242 / 2260 Key B SSD slot
microSD Card Slot

Up to 2xDual RJ-45 Gigabit Ethernet connectors
M.2 Socket1 2230 Key E Slot for WiFi Modules (interface shared with PCI-e x 4 slot)
M.2 Socket2 2260 / 3042 Key B Slot for WWAN Modem Modules (interface shared with PCI-e x 4 slot), connected to on-board microSIM slot

1 x USB 3.0 type A Socket
1 x USB 2.0 type A Socket
1 x USB OTG micro-AB Socket
1 x USB 3.1 Type-C Socket

PCI-e x4 slot, interface shared with M.2 Slots

TRSS Mic In + Line Out Audio Jack
Onboard I2S Audio Codec (TI TLV320AIC3204) + HD Audio
Codec (Cirrus Logic CS4207)

I2S Audio header

2 x CAN ports
2 x RS-232/RS-422/RS-485 configurable serial ports on internal pin header
2 x Serial ports (Tx/Rx signals only, TTL level) on feature pin header

eSPI pin header + Flash Socket
SPI pin header + Flash Socket
I2C EEPROM Socket
4 x 7-segment LCD displays for POST codes
Feature pin header with 2 x Serial ports, I2C, SM Bus, Watchdog and Power Management Signals
GPIO / FuSa pin header
FAN connector
Optional Debug USB port on micro-B connector
Boot selection switches
JTAG connector
Selector for SMARC 2.0 / 2.1.1 pinout compatibility

9-24V through dedicated Mini-Fit Jr 2x2 power connector or USB Type-C connector
6-17V through 2/3/4 Cell Smart Battery Connector

RTC Coin cell battery holder

-40°C ÷ +85°C (industrial range)

*All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.