DEV-KIT-COMe-T6

3 x DP++ connector

VGA connector

LVDS 24-bit Single/ Dual Channel

eDP 4-lanes 40 poles VESA connector

LVDS External EDID flash socket

4 x SATA 7p M connectors

μSD Card slot (interface multiplexed with GPIO header)

1x GbEthernet RJ-45 connector

4x USB 3.1 Host ports on Type-A sockets

4 x USB 2.0 Host ports on Quad Type-A sockets

2x PCI-e x4 Slots

1x PCI-e x16 Slot

On-board HD Audio Codec (Realtek ALC888S)

HD Audio Jacks

S/PDIF Out Optical connector

Mic In + Line Out internal pin header

2 x RS-232 / RS-422 / RS-485 ports on internal pin header (from carrier board’s LPC Dual UART controller)

2 x RS-232 ports on dedicated pin header (from module)

4 x GPI + 4 x GPO pin header (interface multiplexed with µSD slot)

SPI Flash header

Button / LEDs front panel header

4-pin tachometric FAN connector

I2C + SM Bus on feature Pin header

FuSa Header

I2C Flash Socket

JTAG connector

LPC internal header

USB overcurrent header

SM Bus Smart Battery Connector

4 x 7-segment LCD displays for POST codes

LPC/eSPI internal header

ATX 24 poles connector for carrier board working only

Auxiliary 12V connector for carrier board working only

12 VDC power in connector for COM Express module’s working

Cabled Coin-cell connector for RTC

0°C ÷ +60°C ** (Commercial version)

**All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final syste