zh 
SECOCQ7-pITX
Carrier Board for Qseven® QuadMo747 modules on Pico-ITX Form Factor
Product status
Contact us for more information and quotes
Connectivity
9x GPIO on 10 Pin Header Connector; 2x GbE
Product details
Technical Info
-
Description
The Qseven® Carrier Board SECOCQ7-pITX is a full featured carrier board for Qseven® QuadMo747 CPU modules and is in the size of a Pico-ITX board. Due to the embedded module concept this baseboard can be used with every available Qseven® CPU module. -
Video Interfaces
Analog VGA on 12 Pin Header
LVDS Interface, 34 pin 2mm pin header
Backlight Connector, 6 pin, 2mm Pin Header -
Mass Storage
1 x S-ATA connectors
1 x SD Card Slot -
Networking
2 x GbE on Front Panel (1 alternative to miniPCI Express Slot)
-
USB
2 x Double USB on the Front Panel
1 x USB Client on the Front Panel
1 x USB internal -
PCI-e
1 x miniPCI Express (alternative to 1GbE)
-
Audio
Line In – Mic In on 8 Pin Connector
Hearphone on 5pin Header
Speaker on 5pin Header -
Serial Ports
2 x Serial Ports (1 x RS232 full modem, RS-485 configurable, 1x TX/RX signals at TTL level)
-
Other Interfaces
9 x GPIO on 10 Pin Header Connector
-
Power Supply
On Board Lithium Battery for CMOS Backup and RTC
Smart Battery Connector
12V Power jack
5 Pin Header for Power and Reset Button
Optional 12V Micro- Fit jack -
Operating Temperature
0°C ÷ +60°C (commercial version)
*All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
-
Dimensions
100 x 72 mm (3,94” x 2,83”)
Part Number
-
SECOCQ7-pITX
Part number descriptionCarrier Board for Qseven® QuadMo747 modules on Pico-ITX Form FactorContact us for more informations or quotes
联系我们