SBC-3.5-RK3568

Soldered-down DDR4-3200 memory, up to 4GB

Mali-G52 1-Core-2EE GPU

• OpenGL ES 1.1/2.0/3.2
• Vulkan 1.0 and 1.1
• OpenCL 2.0 Full Profile

Embedded Video CODEC

• H.265/H.264/VP9 4K@60fps HW decoding
• VP8/VC1/MPEG-4/MPEG-2/MPEG-1 1080p @60fps HW decoding
• H.265/H.264 1080p@60fps HW encoding Supports 3 independent video outputs

HDMI
LVDS single / dual channel interface
eDP 1.3 interface

HDMI: up to 4K x 2K @60Hz
LVDS: up to 1920 x 1080 @60Hz
eDP: up to 4096 x 2160 (4K)

eMMC 5.1 drive soldered on-board, up to 64GB (first boot device)
microSD slot (second boot device)
I2C flash
QSPI flash (factory option)

2x Gigabit Ethernet ports, implemented using TI DP83867 Ethernet PHY on RGMII interface coming from SoC
Optional on-boad M.2 1216 module WLAN 802.11 a/b/g/n/ac + BT 5.0
M.2 Socket 2 Key B for LTE module + microSIM card slot on-board

2x USB 3.0 Type-A
1x USB 2.0 Type-A
1x USB 2.0 OTG micro-AB muxed with one USB 3.0 (used for Deep Recovery)
1x USB 2.0 internal pin header
1x USB 2.0 internal pin header, dedicated to touch screen

TRRS combo audio jack (stereo mic in, stereo line out)
Mono speaker out (amplified 1.3Watt @8Ohm) on internal header
1x PDM signal ports on internal header

1x debug UART
1x JTAG port
2x 4 wire RS-232 / RS-422 / RS-485 (multistandard transceivers) on internal header
2x 2 wire TTL UART ports on internal header

2x 2-lanes MIPI-CSI camera connector or 1x 4-lanes
M.2 Socket 2 Key M for AI accelerator modules
Dedicated connector for I2C touch screen controller
8x GPIOs or 4x GPIOs + 4 ADC (factory configuration alternatives)
2x CAN, 1x I2C, 1x SPI

+12VDC .. +24VDC range
RTC battery

Linux Yocto
Android