SBC-3.5-MX8X

NXP i.MX 8X family SoCs: Dual or Quad ARM Cortex®-A35 Cores + 1x Cortex® M4F core for real-time processing

NXP i.MX8 QuadXplus, 4x ARM Cortex®-A35 Cores + 1x Cortex® M4F core for real-time processing
NXP i.MX8 DualXplus, 2x ARM Cortex®-A35 Cores + 1x Cortex® M4F core for real-time processing

Soldered down LPDDR4 memory @ 1200MHz, 32-bit interface, up to 4GB

Embedded GC7000Lite GPU
Supports OpenGL 3.0, 2.1, OpenGL ES 3.1, OpenCL 1.2 Full Profile and 1.1, OpenVG 1.1, and Vulkan Embedded VPU,
supports HW decoding of HEVC/H.265, AVC/H.264, MPEG-2, VC-1, RV10, VP8, H.263 and MPEG4.2t, HW encoding of AVC/H.264
2 independent displays supported

Factory options:

 eDP 4-lane interface + LVDS single Channel 18-/24-bit interface

 LVDS Dual Channel / 2 x LVDS Single Channel interface

Up to 1080p60

Soldered onboard eMMC 5.1 Drive, up to 64GB
QSPI NOR Flash soldered on-board

Up to 2 x Gigabit Ethernet ports
On-board WiFi 802.11 a/b/g/n + BT 5.0 module, optional

1x USB 3.0 Host ports on USB 3.0 Type-A socket
1x USB OTG Port on micro-AB connector (interface shared with USB 2.0 interface of USB 3.0 Type-A socket)
2x USB 2.0 Host ports on Dual Type-A socket
1x USB 2.0 Host port on miniPCI-e Slot

Optional mini PCI-e Slot

I2S Audio codec
Mic In + Hp-Out on TRRS combo connector
Line Out + 2x Mic-In interfaces on internal connector

1x UART on expansion connector, optionally with RS-232 interface
1x UART on expansion connector, optionally with RS-485 interface
1x CAN port, available at TTL Level on expansion connector or with CAN transceiver on dedicated connector
2x Debug UARTs on dedicated connectors

Available on expansion connector:
• 16x GPIOs
• I2C interface
• 2x analog inputs
• 1x PWM
Power and reset button input on dedicated connector

Factory option, +12VDC or +24 VDC input voltage
DC power jack or 2-poles PCB terminal block for voltage supply
RTC battery

Linux

-40°C ÷ +85°C  (Industrial version)

*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.