SBC-3.5-MX8M-Mini

NXP i.MX 8M Mini Family based on ARM® Cortex®-A53 cores + general purpose Cortex®-M4 400MHz processor:

i.MX 8M Mini Quad – Full featured, 4x Cortex®-A53 cores up to 1.8GHz
i.MX 8M Mini Dual – Full featured, 2x Cortex®-A53 cores up to 1.8GHz
i.MX 8M Mini Solo – Full featured, 1x Cortex®-A53 cores up to 1.8GHz
i.MX 8M Mini Quad Lite – 4x Cortex®-A53 cores up to 1.8GHz, no VPU
i.MX 8M Mini Dual Lite – 2x Cortex®-A53 cores up to 1.8GHz, no VPU
i.MX 8M Mini Solo Lite – 1x Cortex®-A53 cores up to 1.8GHz, no VPU 

Soldered-down LPDDR4 memory, up to 4GB total, 32-bit interface

GC320 2D accelerator + GCNanoUltra 3D accelerator Embedded VPU (not for Lite processors), able to offer:
VP9, HEVC/H.265, AVC/H.264, VP8 HW Decoding
AVC/H.264, VP8 HW encoding

OpenGL ES 2.0, OpenVG 1.1 support

LVDS Single/Dual Channel connector or eDP connector (factory alternatives)
MIPI-CSI Camera interface connector

Up to 1920x1080p60, 24bpp

Optional eMMC 5.1 drive on-board, up to 64GB
MicroSD slot
2Kb I2C Flash
QSPI Flash

2x GbEthernet interfaces (1 optional)
Optional shielded ultra-small dual Band WiFi 802.11 a/b/g/n/ac with Bluetooth 5.0 module onboard
Optional soldered on-board LTE Cat 4 Modem with SIM slot or Telenor eSIM with 5MB Bundle

2x USB 2.0 Host ports on Type-A socket
2x USB 2.0 Host ports on internal pin header
1x USB Host or client port on micro-AB connector (interface shared with the optional on-board modem)

Digital Mic In connector (2x PDM inputs)
Amplified mono Speaker Output

Up to 2x RS-232 or RS-485 or CAN Serial ports (factory options, shared with GPIOs and SPI interfaces)
2x Debug UARTS

I/O Connectors with:
• 2xPWM @3.3V
• GP I2C interface @3.3V
• 1x Open Drain output (max 12V, 250mA)
• 2x GPIOs @3.3V 
• 1xRS-232 or 1x RS-485 or 4x GPIOs / 1x UART or 1x CAN (factory options)
• 1xRS-232 or 1x RS-485 or 4x GPIOs / 1x UART or 1x CAN + on-board ultra-low power RTC (factory options)
Watchdog 
Dedicated connector for I2C Touch Screen Controller Support 
Onboard Buzzer (Comm. temp. range only)
Optional Ultra Low Power RTC

+12VDC÷ +24VDC

Yocto
Android (planned)

0°C ÷ +60°C (extended version)

-40°C ÷ +85°C (industrial version, limited to -30°C ÷ +85°C with WiFi/BT module on-board)

*Measured at any point of SECO standard heatsink for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.