Product details
Technical Info
-
DescriptionThe pConXS is a very compact and multifunctional Carrier Board Trizeps SODIMM SOMs. In addition to numerous standard interfaces, an analog camera interface and a Mini PCI Express card edge connector are available. The baseboard supports a lot of LCD displays thanks to the HDMI, Dual LVDS and touchscreen LCD interfaces.
-
Processor
Defined by compatible Trizeps SODIMM SOMs
• NXP i.MX 6 Quad, Dual, DualLite, Solo, SoloX ARM Cortex A9 up to 1.0 GHz on Trizeps VII SOM
• NXP i.MX 8M ARM Cortex A53 up to 1.5 GHz, up to Quad Core, integrated ARM Cortex M4 on Trizeps VIII SOM
• NXP i.MX 8M Mini ARM Cortex A53 up to 1.8 GHz, up to Quad Core, integrated ARM Cortex M4 on Trizeps VIII Mini SOM
• NXP i.MX 8M Nano ARM Cortex A53 up to 1.5 GHz, up to Quad Core, integrated ARM Cortex M7 on Trizeps VIII Nano SOM
• NXP i.MX 8M Plus ARM Cortex A53 up to 1.8 GHz, up to Quad Core, integrated ARM Cortex M7 on Trizeps VIII Plus SOM -
Graphics
RGB, LVDS, Dual LVDS, HDMI (with Trizeps VII, Trizeps VIII, Trizeps VIII Plus)
-
Video Interfaces
HDMI, LVDS or Dual LVDS, RGB interfaces enable easy integration of various touch displays
-
Mass Storage
SD Card Socket
-
Networking
10/100/1000 Mbit Ethernet RJ45 Connector
Wireless functionalities depend on Trizeps SOM:
• Trizeps VII: Onboard WiFi Bluetooth Modul, IEEE 802.11 a/b/g/n/e/i/h/d/k/r/w, +18 dBm, 72 Mbps (20 MHz) and up to 150 Mbps (40 MHz), Bluetooth 3.0+ EDR
• Trizeps VIII and Trizeps VIII Mini: Onboard WiFi-Bluetooth module, WiFi 2.4GHz/5Ghz, 802.11 a/b/g/n/ac 2x2 MU-MIMO / Bluetooth 5.0 -
USB
USB2.0 Host, USB2.0 OTG, USB2.0 touch interface, USB2.0 Header
-
PCI-e
Mini PCIe Half-/Full Size card edge connector, combined with nano SIM card slot
-
Audio
3.5mm Stereo Jack, Digital Microphone Connector
SL2-40 pin header: stereo headphone (16R and 32R), speaker (Mono, 8R), LineIn, microphone -
Serial Ports
RS232 via D-SUB
SL2-40 pin header: 2x UART -
Other Interfaces
4 wire resistive touch interface, Realtime Clock with Backup Cap or battery, LED, 3-Axis 12-bit/8-bit digital accelerometer, temp. sensor, SATA II connector, I2C extension header, reset and user tactile switch, powerfail detection, analog BNC / Mini BNC parallel camera interface, MiPi camera connector
1x 40-pin extension connector:
GPIOs (1x with PWM), SPDIF (out and in), 2x CAN, SDIO, I2C, 3 x ADC -
Power Supply
Industrial +12 up to +24V supply
-
Operating System
Linux Yocto, Linux Debian, Android, Windows 10 IoT
-
Operating Temperature
-20 ÷ 85°C
-
Dimensions118.5 mm x 84.0 mm x 43.0 mm