CQ7-D59

LVDS Single/Dual Channel 18-24-bit + HDMI Connector or 2 x
eDP connectors + Multimode Display Port

1 x SATA connector with HDD Power connector
1 x M.2 Socket 2 2242 Key B SSD Slot
microSD Slot on combo microSD + SIM connector

Up to 2 x Gigabit Ethernet connectors
1 x M.2 Socket 2 2242/3042 Key B Slot for WWAN Modem Modules, connected to on-board miniSIM slot

2 x Superspeed USB 5Gbp Host port on Dual Type-A socket
1 x USB 2.0 Host ports on double Type-A sockets
1 x USB 2.0 Host on internal M.2 Socket
1 x USB 2.0 OTG port on micro-AB socket (USB port shared with USB 2.0 lanes of 1 x USB 3.0)

Audio interface on internal pin header

4-wire RS-232 / RS-422 / RS-485 configurable serial port on DB9 male connector
2 x RS-232 Full-modem serial ports on internal header (need LPC interface from Qseven® module)
CAN interface on PCB terminal block

SPI internal pin header
LPC Bus internal pin header
SM Bus / I2C GPIO expander, makes available 16 x GPIOs on internal pin header
Front Panel Header
1 x 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management)
+12V Tachometric FAN connector
Optional Debug USB port on miniB socket
Optional MFG connector for JTAG programming of Qseven® module

24VDC ±5% through Micro-fit 2x2 power connector
Coin cell battery Holder for CMOS and RTC

-40°C ÷ +85°C (Industrial temperature range)

*All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.