COM-HPC CLIENT DEV KIT

1x 40-poles eDP/DSI connector
3x DP++ connectors
2x CSI Camera Input Connectors

2x S-ATA 7p M connectors
2x M.2 Socket 3 Key M slots for M.2 NVMe Drives

2x NBase-T Ethernet RJ-45 connectors
2x 10Gbase-KR interfaces on OCP Type-C connector

4x USB 4.0 / USB 3.2 Gen2x2 ports on Standard Type-C
sockets with PD functionality
4x USB 2.0 Host ports on standard Quad Type-A Socket
USB Overcurrent pin header

2x PCI-e x4 Slots
2x PCI-e x4 interfaces on M.2 Socket 3 Key M Slots
2x PCI-e x16 Slot

I2S Audio Codec
Line In, Line Out, Mic in Triple Audio jack
Mic In + Line Out internal pin header
I2S/Soundwire shared interface + Soundwire only interface on
internal pin header

2 x RS-232/RS-422/RS-485 ports on dedicated pin header
(from module)
2 x RS-232/RS-422/RS-485 ports on dedicated pin header
(from eSPI Dual UART controller)

BMC connector with SM Bus, I2C, eSPI, 1x USB 2.0, 1x
PCI-e x1, 1 x UART, 2x GPIO
12 GPIO pin header
Boot SPI Internal Header
Button / LEDs front panel header
4-pin tachometric FAN connector
Feature Pin header with 2xI2C, SM Bus, GP SPI,
Management signals
I2C Flash Socket
SM Bus Smart Battery Connector
2x 7-segment LCD displays for POST codes
eSPI internal header
Functional Safety (FuSa) internal pin header

ATX 24 poles connector for carrier board working only
Auxiliary 12V PCI-e 6-pin power connector
Dedicated EPS CPU Power in connector (voltage range 8..20V)
for COM HPC Client module’s working
Cabled Coin-cell connector for RTC

-40°C ÷ +85°C (Industrial Temperature range)