Carrier-COMe-T6-E10

3 x DP++ connectors or 1 x DP++ connector and 2 x USB4.0
Type-C with Alternate-Mode
VGA connector
LVDS 24-bit Single/Dual Channel
eDP 4-lanes 40 poles VESA connector
Backlight control + LCD selectable voltages dedicated
connector
LVDS External EDID flash socket

4x S-ATA 7p M connectors
μSD Card slot (interface multiplexed with GPIO header)

1x GbEthernet RJ-45 connector

2 x USB 4.0 on Type-C sockets with Alternate-Mode (factory
alternative to 2 x DP++ and 2 x USB 2.0)
4 x USB 3.2 Host ports on Type-A sockets
4 x USB 2.0 Host ports on Quad Type-A sockets

2x PCI-e x4 Slots Gen4
1x PCI-e x16 Slot Gen4

On-board HD Audio Codec (Realtek ALC888S)
5.1 Audio Jack with S/PDIF Optical interface
Mic In + Line Out internal pin header

2 x RS-232 / RS-422 / RS-485 ports on internal pin header
(from carrier board’s LPC Dual UART controller)
2 x RS-232 ports on dedicated pin header (from module)

4 x GPI + 4 x GPO pin header (interface multiplexed with
μSD slot)
SPI Flash Socket
Button / LEDs front panel header
4-pin tachometric FAN connector
I2C + SM Bus on feature Pin header
I2C Flash Socket
SM Bus Smart Battery Connector
4 x 7-segment LCD displays for POST codes
LPC/eSPI internal header

ATX 24 poles connector for carrier board working only
Auxiliary 12V connector for carrier board working only
12 VDC power in connector for COM Express module’s
working
Cabled Coin-cell connector for RTC